Ask Proxima DP2800 User Manual
Page 31
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Chapter 2 • Detaiied Setup
COMPUTER AUDIO IN
The COMPUTER AUDIO IN connector allows rhe Model
DP2800 to receive audio input from a computer or a
microphone.
Connecting Youn Computer’s Audio
1. Insert the mini jack end of the computer audio cable (part
number C498-6) into the AUDIO OUT connector of a
Macintosh or the sound card of an IBM compatible.
2. Insert the RCA jacks at the other end of the computer audio
cable into the projector’s left and right COMPUTER AUDIO
IN connectors.
AUDIO IN
The Model DP2800 has left and right stereo connectors for audio
input from VCRs, laserdisc players, and other video equipment.
Connecting
a
Video Audio Source
The composite audio/video cable (part number C497-6) is made
up of 3 cables with yellow, red, and white RCA plugs,
1, Insert a white RCA plug into your video source’s left AUDIO
OUT connector. Insert the other white RCA plug into the
projector’s left AUDIO IN port.
2-16 • User’s Euide