Ask Proxima DP2800 - Manual (Page 27)

Chapter S • Decsited Setup
Notes If )roii wane to use your desktop computer without a
monitor, connect one of the supplied video terminators to the
short end of the Y-cable (marked MONITOR). Use the
appropriate terminator for your system. For IBM compatibles, use
part number C936; for Macintosh systems, use part number
C935.
Notebooks/Laptaps
Use the Y-cabJc appropriate to your system. For IBM
compatibles, use part number C454-6; for Macintosh systems, use
part number C464-6.
1. Turn off ail power to your notebook or laptop computer and
the Desktop Projector.
2. Locate the Y-cable's common end, marked CPU/MAC II for
Macintosh systems or COM PUTER/VGA for IBM
compatibles. Plug it into the computer’s monitor port.
3. Insert the Y-cab!e’s large, 25--pin connector (marked LCD)
into the Desktop Projector’s COMPUTER port.
4. Attach the appropriate video terminator to the short end of the
Y-cable (marked MONITOR). For IBM compatibles, use part
number C936; for Macintosh systems, use part number C935-
Not:e: If you don’t get an image (i.e., your Desktop Projector is
unable to project an image at the same time that your laptop
computer displays a screen image), refer to your computer's
reference materials for information on how to switch between the
internal screen and the video port.
2-i 0 • User’s Guide