Ask Proxima DP2800 User Manual
Page 38
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Chapter 2 * Datai ied Setup
ISiotie:
If you turn the Desktop Projector off while the rest of
your computer system is running, your external monitor will go
blank. This is norma!. Just turn the Desktop Projector on again
and your monitor display will return.
Turning On/Off the Lemp
When you first turn on the projector, the lamp will be on. To
turn the Desktop Projector’s lamp off, press the LAMP key on the
Control Panel or remote control. Pressing the LAMP key again
will turn the lamp on. The lamp turns on slowly to prolong lamp
life.
Figur® *19
The LAMP key
jjKTH IMcrfce: Turning the lamp off does not cut power to the
projector. The fans will still operate. You must moYe the AC
POWER switch to the OFF position to completely power down
the projector.
User's eSutde • 2--23