CBM America CBM-262 User Manual
Page 95
7
Chapter 7
Print Control Codes
86
(51) Printing a downloaded bit image (GS / m)
Code: [1D] h + [2F] h + m
* (0
m
3, 30
m
33) Data are expressed in Hex code.
This command prints a downloaded bit image in the mode specified by m.
•
The modes selected by m are as shown in the following table.
m
Mode Name
Vertical Dot Density Horizontal Dot Density
0,30
Normal Mode
203 DPI
203 DPI
1,31
Horizontal
203 DPI
101 DPI
Double Mode
2,32
Vertical Double
101 DPI
203 DPI
Mode
3,33
Quadruple Mode
101 DPI
101 DPI
•
If data exist in the print buffer, this command is disregarded.
•
If a downloaded bit image is not defined, this command is disregarded.
•
The portion of a downloaded bit image that exceeds the length of a line is not
printed.