CBM America CBM-262 - Manual (Page 84)

7
75
(33) Arranging the printing position (ESC a n)
Code: [1B] h + [61] h + n
* (0
n 2, 30 n 32) Data are expressed in Hex code.
• This command arranges all the print data on one line in specified positions.
• Printing arrangement is executed as follows in accordance with the value of n.
n = 0, 30: Specifies left alignment.
n = 1, 31: Specifies centering.
n = 2, 32: Specifies right alignment.
• This command is valid only if input at the head of a line.
• If this command is input when selecting the Page mode, the printer's internal flag
only is operated.
• This command does not influence the Page mode.
• The initial value is “n = 0”.
(34) Selecting the printing sheet (ESC c 0 n)
Code: [1B] h + [63] h + [30] h + n
* (1
n 3) Data are expressed in Hex code.
Selects the sheet (receipt/journal) which is printed.
•
Each bit of n is as shown in the following table.
• This command is valid if input at the head of a line.
• If a Page mode printing sheet is selected, execute this command before ESC L.
Once the Page mode is selected, this command is disregarded.
• If the value of n deviates from the definition range, this command is disregarded.
• The initial value is “n = 3”.
Bit Function
Value
0 1
0 Journal Disable Enable
1 Receipt Disable Enable
2 Not defined
3 Not defined
4 Not defined
5 Not defined
6 Not defined
7 Not defined
Input Data Format