CBM America CBM-262 User Manual
Page 79
7
Chapter 7
Print Control Codes
70
(28) Selecting the standard mode (ESC S)
Code: [1B] h + [53] h
This command switches the printer from the Page mode to the Standard mode.
•
This command is valid only when input in the Page mode.
•
Data developed in the Page mode are erased.
•
The top of the line is made the next printing position.
•
The printing area set by ESC W is initialized.
•
The values set in the following commands which are set independently in the Page
mode and the Standard mode, respectively, are switched to the values set in the
Page mode.
ᕃ Space amount setting
ESC SP, FS S
ᕄ Line feed amount setting
ESC 2, ESC 3