CBM America CBM-262 - Manual (Page 109)

7
Chapter 7 Print Control Codes
100
(63) Selecting the font of HRI characters (GS f n)
Code: [1D] h + [66] h + n
* (0
n 1, 30 n 31 ) Data are expressed in Hex code.
This command selects the font of HRI characters when printing a bar code.
•
n has the following meanings.
• The initial value is “n = 0”.
(64) Selecting the bar code height (GS h n)
Code: [1D] h + [68] h + n
* (1
n FF) Data are expressed in Hex code.
This command selects the bar code height.
•
n indicates the number of dots in the vertical direction.
• The initial value is “n = A2”.
n(Hex) Font
0, 30 Font A
1, 31 Font B