CBM America CBM-262 - Manual (Page 77)

7
Chapter 7 Print Control Codes
68
(26) Selecting the page mode (ESC L)
Code: [1B] h + [4C] h
This command switches the printer from the Standard mode to the Page mode.
•
This command is valid when it is input at the top of a line.
• This command is invalid when input in the Page mode.
• The printer returns to the Standard mode after printing by FF is completed, or by
execution of ESC S.
• The character development position is the starting point specified by ESC T within
the printing area specified by ESC W.
• The values set in the following commands which are set independently in the Page
mode and the Standard mode, respectively, are switched to the values set in the
Page mode.
ᕃ Space amount setting
ESC SP, FS S
ᕄ Line feed amount setting ESC 2, ESC 3
• The following commands are valid only when set in the Page mode.
ᕃ ESC V
Specifying/Clearing 90 degree right rotated characters.
ᕄ ESC a
Arranging the position
ᕅ ESC {
Specifying/Clearing inverted characters.
ᕆ GS L
Setting the left margin.
ᕇ GS W
Setting the printing area
• The printer is returned to the Standard mode by ESC @.