CBM America CBM-262 - Manual (Page 70)

7
61
m(Hex) Mode
Vertical Direction Horizontal Direction
Number of
Dot Density Dot Density
dots
0 8 dot single density 8 67 DPI 101 DPI
1 8 dot double density 8 67 DPI 203 DPI
20 24 dot single density 24 203 DPI 101 DPI
21 24 dot double density 24 203 DPI 203 DPI
(15) Specifying a bit image (ESC * m n1 n2 D1~Dn)
Code: [1B] h + [2A] h + m + n1 + n2 + Dn
* (m = Bit Image Mode (See the following table.)
(0 n1 FF)
(0 n2 03) Data are expressed in Hex code.
Data are printed in a bit image in accordance with the Bit Image mode specified by m.
•
The number of dots printed in the horizontal direction is divided by 256, with n2
being the product and n1 the remainder.
• The total number of dots printed as the bit image is n1 + (256 x n2).
• If bit image data which exceed the space of one line are input, the portion of data
that runs over the end is dropped.
• Bit image data (Dn) are specified by “1” in printed bits and by "0" in nonprinted
bits.
• The Bit Image mode is as shown in the following table.
• If they deviate from the conditions of the values set in m (Bit Image mode), n1 and
subsequent data are processed as ordinary character data.
Input Data Format