ClearOne AP800 - Manual (Page 8)

Introduction ~ Unpacking
Ensure that the equipment shown below was received with your shipment.
4
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
Unpacking
www.gentner.com Audio Products
AP800 Audio Conferencing System
Gentner Corporation ~ 1825 Research Way, Salt Lake City, UT 84119 ~ tel 1-800-945-7730 ~ fax 1-800-933-5107
Installation & Operation Manual
AP800 Installation
and Operation Manual
Optional
Figure 1.1. Equipment
ClearOne is not responsible
for product damage
incurred during shipment.
You must make claims directly with
the carrier. Inspect your shipment
carefully for obvious signs of
damage. If the shipment appears to
be damaged, retain the original
boxes and packing material for
inspection by the carrier. Contact
your carrier immediately.
!
Controls and Connections
A B C E F D
Figure 1.2. Front panel controls
Front panel
A. LCD. The two-line, 16-character-per-line LCD display is used for AP800
setup and level adjustments in conjunction with the four associated front-
panel buttons.
B. Enter/▲▼/ESC. These buttons are used to navigate the AP800’s menu
system.
C. LED Meter. The LED bar meter is displays the audio level of any selected
input or output on the AP800, as well as display echo return loss (ERL) and
echo return loss enhancement (ERLE) for mic channels 1–8.
The front panel buttons
are also used to enter the
front panel passcode. See
Lock Panel (page 15) for more
details. The front panel passcode
can also be established in AP-Ware.
Refer to the AP-Ware help file for
more information.
✍