ClearOne AP800 - Manual (Page 48)

Appendices ~ Appendix F: Serial Commands 44
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
FLOW
This command selects or reports whether hardware flow control
is enabled or disabled for the AP800. Hardware flow control is
implemented using RTS and CTS.
[DEVICE] FLOW
Explanation
X=0 Sets flow control to OFF
X=1 Sets flow control to ON
X=Null Parameter to return the current mode
Return Values
The command will return the updated condition (On=1, Off=0)
of the AP800 in the same format as the command.
FMP
This command selects or returns the current status of the first
microphone priority mode for the AP800.
[DEVICE] FMP
Explanation
X=0 Parameter to select first microphone priority mode
to OFF
X=1 Parameter to select first microphone priority mode
to ON
X=Null Parameter to return the current mode
Return Values
The command will return the updated condition (On=1, Off=0)
of first mic priority mode in the same format as the command.
FMP
This command selects or returns the status of the first
microphone priority mode for the AP800.
[DEVICE] FMP
Explanation
X=0 Parameter to select first microphone priority mode
to OFF
X=1 Parameter to select first microphone priority mode
to ON
X=Null Parameter to return the current mode
Return Values
The command will return the updated condition (On=1,
Off=0) of first mic priority mode in the same format as the
command.
FPP
This command sets and reports the current passcode setting
for the AP800.
[DEVICE] FPP
Explanation
X=1 ▲ button
X=2 ENTER button
X=3 ESC button
X=4 ▼ button
X=5 METER button
X=6 INPUT button
X=7 SYSTEM button
X=8 OUTPUT button
X=9 ROUTING button
X=Null Parameter to return current passcode
Return Values
The command returns the current or updated condition of the
front panel passcode.