ClearOne AP800 - Manual (Page 5)

Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
Congratulations on purchasing the Audio Perfect ® 800, an advanced twelve-by-
twelve digital matrix mixer with Gentner ® Distributed Echo Cancellation ® and audio
processing. It uses six user-definable presets to quickly adapt to a variety of
teleconferencing and sound reinforcement applications such as distance learning,
teletraining, telemedicine, courtrooms, conference rooms, boardrooms, hotels, and
houses of worship.
All of the AP800’s functions are programmed in AP-Ware™, an all-new
configuration software. The result is quicker setup, with fewer hassles and more
control.
In its most simple form, the AP800 is a mic mixing matrix. As such, all mic
mixing parameters can be customized and any input or combination of inputs can
be routed to any output or combination of outputs. This allows great flexibility in
accommodating a variety of applications and requirements.
The AP800 features numerous functions which greatly enhance its
performance and flexibility. For example, it can gate mics on and off when the
sound within a mic’s acceptance pattern reaches a certain level.
The AP800 monitors each mic independently, observing ambient levels and
making decisions based on each mic’s environment. Thus, the input for a mic
located in a highly reverberant part of a conference room is gated, mixed, and
processed to compensate for the changes in that area and reduce echo and noise.
This improves audio quality and decreases the possibility of feedback.
The AP800 facilitates local and remote PC setup and diagnostics, logic
outputs, and automatic gated mic operation. Mic inputs can be individually
customized to gate on and off as you want, while automatic gain control keeps the
overall sound level consistent. Eight of the 12 channels can be configured as an
automatic microphone mixer.
Adjustments in routing, level, and other functions can be made through
presets activated through a rear-panel closure or an RS-232 serial interface.
Network-based interconnectivity allows up to eight AP800/AP400 units to be
connected and controlled as a single unit.
CHAPTER 1: Introduction
Product Overview