ClearOne AP800 - Manual (Page 47)

43
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
Appendices ~ Appendix F: Serial Commands
EC
This command changes or reports back the state of
the echo canceller for a microphone.
[DEVICE] EC
Explanation
CH= 1-8 Parameter to apply to the specified
mic channel
CH= * Parameter to apply command to all mic
channels
X=0 Parameter to set the state to OFF
X=1 Parameter to set the state to ON
X=Null Parameter to return the current state
Return Values
The command will return the updated condition
(On=1, Off=0) of the echo canceller in the same
format as the command.
EQ
This command changes or reports back the state of
the equalizer for a microphone.
[DEVICE] EQ
Explanation
CH= 1-8 Parameter to apply to the specified
mic channel
CH= * Parameter to apply command to all mic
channels
X=0 Parameter to set the state to OFF
X=1 Parameter to set the state to ON
X=2 Parameter to toggle the state from one
state to the other (regardless of
current state)
X=Null Parameter to return the current state
Return Values
The command will return the updated condition (On=1, Off=0) of
the equalizer in the same format as the command.
ERL
This command reports back the echo return loss (ERL) for a
microphone channel in dB.
[DEVICE] ERL
Explanation
CH= 1-8 Parameter to apply to the specified
microphone channel
Return Values
The command will return the ERL of the microphone channel in the
same format as the command (#10 ERL 1 20).
ERLE
This command reports back the echo return loss enhancement
(ERLE) for a microphone channel in dB.
[DEVICE] ERLE
Explanation
CH= 1-8 Parameter to apply to the specified
microphone channel
Return Values
The command will return the ERLE of the microphone channel in
the same format as the command (#10 ERLE 1 20).