Meter parameters, Echo cancellation setup, Installation ~ lcd programming – ClearOne AP800 User Manual
Page 31: Inputs, outputs, erl, and erle, Default meter
27
Installation
~ LCD Programming
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
Outputs
G-Link
EC Ref
A
B
C
D
6
8
7
5
4
3
2
1
Echo Cancellation Setup
Define EC Ref #1
Define EC Ref #2
Define G-Link EC Ref Bus
Figure 2.21. EC Setup for Multiple Units to One Output (Slave Unit)
Meter Parameters
There are five main submenus under the meter menu tree: Inputs, Outputs, ERL,
ERLE, and default meter (see Figure 2.22). The first four submenus are all handled
in the same way.
Inputs, Outputs, ERL, and ERLE
Using the LCD, press the Meter button, then scroll through the options (inputs,
outputs, ERL and ERLE) to specify which is to be metered by the front-panel LED
meter. When the desired option is visible, press Enter to begin monitoring its status
on the front-panel LED.
Default Meter
The default meter parameter determines what is being displayed on the LED meter
when a parameter is not using the LED bar graph, and the AP800 times out (see
Timeout, page 20).
Figure 2.22. Meter submenu