SINGER XL1000 Quantum - Manual (Page 72)

Using |?^| key
Press
It is possible to change display time of error message and setting
of automatic backtack stitching or thread trimming.
m
screen.
key contained
to call up option
After you have changed specific items, press
Then, press
OK key.
key.
To restore screen to previous one, press AUTO key.
NOTE:Although option touch-screen
iO& indicates main unit, three of the
option functions have a significant effect
on embroidery sewing.
«Option»
Error message indication time.-
AUTO
T7___________
10
n
-Additional stitches which may be sewn.
after indication of low bobbin.
Error message display time:
Length of time during which error
message is displayed can be Increased
or decreased. (There are a number of
error messages associated with embroidery)
Setting of number of stitches machine is allowed
to sew with low bobbin:
The number of stitches that can be sewn
after error message “Bobbin thread
supply low. Check bobbin” Is displayed.
(Bobbin thread supply is crucial with embroidery)
Setting of automatic backtack stitching and thread cutter:
Whether backtacking/thread cutting is
automatically specified when selecting
pattern or manually specified can be
selected. (This selection cannot be made
when embroidery bed is installed on
^Welcome screen indication.--------------------------------
■ ON □ OFF
machine as it is always automatic).
Welcome screen display:
It is possible to directly display
carriage movement (initializing) screen
by electing to not have Welcome
screen greet you when power is
turned on.
y
AUTO OK
«Opt ion • E mbro Idery »
A
Setting sewing range confirmation:
•Setting sewing range confirmation.-
AUTO
.-_Ll ■ T
h
H
Setting needle position adjustmen
AUTO
f-
- - - - - -
10
- < m _ _ _ _ _ _ _ _ _ ...► .. ±. . . . 1
-Setting size of letters.-
AUTO
T7
-
<<1
7 10152025303540
► + 1
j-Setting density of lette irs.
AUTO
- 4 1
0.6 0.5
> + I
AUTO OK
^ )
Length of time during which carriage
rests at each of four corners of sewing
area being confirmed can be specified.
(See page 79)
Setting of number of stitch correction increments
when using broken thread “HELP” function:
The number of stitches to be skipped by
pressing or !► + i key in the case
of thread breakage, broken needle, etc
to allow faster or slower positioning
of needle can be adjusted (see page 85)
(For the re-sewing of large pattern, exact
position can be reached quickly by increasing
the number of stitches to be skipped.)
Alphabet size conversion:
Starting size of built-in alphabet
embroidery can be specified.
Alphabet density:
Stitching density for built-in alphabet
embroidery can be specified.
71