How to select needle position, Tirnrnit, Düe) – SINGER XL1000 Quantum User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
il*- iP i -
» I
(lb
g---------------
f[iJT
M T|
TirnrniT
j I
’
gd
I
ge
)'
’€DÜE)]
How to select needle position
(Only works with straight stitch)
Press needle position keys to select
from among
22
possible needle positions.
After finishing a seam, raise needle and Hold upper and bobbin threads
Pull upper thread to wrong side of
presser foot, and slowly pull material together, pull them out about 4” and fabric, and knot upper and bobbin
from under presser foot.
cut them with thread cutting groove threads. Cut threads as close to knot
located at rear of presser foot.
as possible. This technique is useful
for securing pattern stitches.
Note:
It is advisable to use automatic thread cutter at end of a seam.
Use thread cutting groove located at back of presser foot for cutting thick threads or special types of thread.
18