Heirloom sewing (using wing needle), Quilting (using quilt guide), Furîtann – SINGER XL1000 Quantum User Manual
Page 56
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CAUTION: Make sure power/light switch is off before changing needle.
Heirloom Sewing (Using wing needle)
I Use correct
, presser foot.*
Automatic
3
needle threader
cannot be used.
4
Recommended
Heirloom Patterns.
Pattern Category
Touch-screen
.31«.
’îlf
Pattern Category
m m \
Screen
«° furîTann
☆When using wing needle, do not use thread cutter (needle may bend).
Pattern is single
pattern so press H or
^ key.
Quilting (Using Quilt guide)
1
Select pattern as
desired.
Two plies of material
are joined together with
parallel rows of
stitching. Batting is
usually placed between
layers of material,
which is used for
protection against cold
or for decoration.
Select a pattern from straight
stitch, zigzag patterns or all
continuous patterns as
desired.
I When using zigzag stitch gy Use correct presser
. stitch width may be used. O foot.
55
■Attaching quilt guide.
I Sew quilting on material using quilt guide
► to trace pattern previously sewn.
by moving quilt guide.