SINGER XL1000 Quantum - Manual (Page 34)

Automatic Buttonholes 0
• When sewing knit or other
stretchy materials, apply
interfacing to the material, and
set presser foot pressure
adjustment lever to “LOW”.
• Be sure to sew a test
buttonhole first.
• Automatic stitch length
(density) is 0.5 for bartack
buttonholes and 0.6 for
keyhole buttonhole. Adjust
buttonhole density by
adjusting stitch length
(see page 20).
' Automatic buttonholes foot has an underplate for sewing
perfect buttonholes along edge of garments where fabric
layers are not equal. Underplate may be removed for
special applications such as a double-breasted coat.
E
E
For sewing small buttonholes on light
weight fabric.
For sewing small buttonholes on light
to medium weight fabric.
n I For sewing large buttonholes on
U I medium to heavy weight fabric.
a
0
For sewing large buttonholes in thick
or heavy weight fabrics.
For sewing small buttonholes on light
to medium weight fabric.
B For sewing small buttonholes In shirts,
blouses, etc.
I Change foot.
Attach buttonhole foot as illustrated.
, Position Needle and Bobbin
> threads.
bobbin thread between buttonhole foot and
underplate.
■Place button in buttonhole foot.
n step 2
Button slide
After placing button in presser foot,
push slide to set buttonhole length.
Mark Buttonhole
Remove button. O Positions.
Note: When sewing buttonholes be sure to support the weight of the garment.
33