Adjusting contrast of touch-screen, Singer, Lodbbe) q0i[e)| 0 – SINGER XL1000 Quantum User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Adjusting Contrast of Touch-screen
If LCD screen is too bright or dark to clearly view the stitch patterns, adjust screen contrast with the
LCD Brightness Control.
1
Touch Welcome Screen.
, Press!
button.
key.
SINGER
(§b
0-------------
■
Cp
i i ^ i
C
i
i
I 10 20
(
XDC
lODBBE)
Q0i[E)|
0
■COperation Guidance>
_ When too bright, Press
I
I
,
^ When contrast is
O
too dark. Press | ~ | .
O correct. Press
«LCD Brightness control»
+
Press r~J or r+J key to adjust
LCD Brightness.
Adjust.contrast so left pattern is one half
the contrast of right pattern.
NOTE:
In the event screen is invisible, turn power OFF and then ON again while touching screen.
Then adjust contrast following above instructions.
After contrast has been adjusted the O key MUST be pressed to set the adjustment.
NOTE:DO
NOT PRESS TOO HARD ON THE TOUCH-SCREEN.........A LIGHT TOUCH IS ALL THAT IS
REQUIRED.
10