SINGER XL1000 Quantum - Manual (Page 35)

a
a
a
Automatic buttonhole steps
For sewing large buttonholes on medium
to heavy weight fabric.
For sewing large buttonholes in thick
or heavy weight fabrics.
For sewing small buttonholes on light
to medium weight fabric.
For sewing large buttonholes in thick
or heavy weight fabrics.
I For stretch fabrics such as cotton jersey.
For knit fabrics such as double knit.
Tacking stitch
At end of buttonhole
11 machine will sew a
' tacking stitch, then stop
automatically,
acking stitch
Position material.
8
Lower buttonhole foot. ' Lower buttonhole lever.
and underplate. of needle hole in foot.
• Attempting to sew without lowering the buttonhole lever, will cause problem indicator to flash on and off, and machine
will not start.
► If buttonhole length is set wrong, or needle or bobbin thread runs out, restart buttonhole from beginning by pressing
buttonhole stitch pattern selection button once.
10
Begin sewing.
11
Press thread cutter button.
threads.
12
Open completed buttonhole,
using seam ripper.
11 Bartacked
ü buttonholes ^ Straight pin
, f ; ::
^ Seam ripper
ft Keyhole i i Eyelet
y buttonhole S—T
Cut middle of buttonhole open using seam ripper,
being careful not to cut threads.
It is advisable to place a straight pin at end of
buttonhole to help prevent overcutting.
Use eyelet punch to cut out round portion of
keyhole buttonhole. It is advisable to place fabric
on old piece of wood.
34