Lace application, Piping (cording) – SINGER 5160 User Manual
Page 94
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

S I N G E R
Lace Application
RECOMMENDED INITIALSETTINGS
Pattern: Zigzag
Needle Position: Left
Stitch Width: 1.5 to 2 mm
Stitch Length: 1 - 2
Foot: General Purpose
Align the right side of your fabric with the right side of
your lace. Zigzag along the edge of the 2 layers of fabric,
so that the needle swings off the right edge of the fabric
when sewing. This is referred to a roll and whip stitch.
Once your seam is completed, press the seam open.
Piping (Cording)
RECOMMENDED INITIALSETTINGS
Pattern:Straight Stitching
Needle Position: Center
Stitch width: For Straight Sewing
Stitch Length: 2 - 3
Foot: Zipper
Using zipper foot, cover cord with a bias strip of fabric.
Pin or tack piped edge between 2 layers of fabric so that
raw edges are aligned. Attach zipper foot to shank so
that needle passes through the opening on right side of
foot. Sew piping along edge of cording.
Fig.1
Fig. 2
O '
o
o
o
o
o
o
92