Winding a bobbin – SINGER 5160 User Manual

Page 36

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

S t N G E R

Winding a bobbin

1. Turn off the machine. Open the bobbin visor and

remove the empty bobbin.

2. Lift the presser foot and press the bobbin winding

indent located on the hand wheel (illustrationi).

3. Place spool of thread on spool pin and slide spool

pin holder firmly over rim of spool. Note that the

thread must come out from the top of the spool

(illustration 2).

Note: Use the spool pin holder that is slightly larger

than the spool of thread. Be sure to place the

groovedend of the spool toward theright.

4. Lead thread end and snap it into lower thread

guide notch, then upper notch, from left to the

right, making a turn (illustration 3).