Dismantling and assembling the shuttle race, To assemble the shuttle race – Sears 38512102 User Manual
Page 62
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Dismantling and Assembling the Shuttle Race
NOTE: Turn of the power switch or unplug the machine.
@ Bobbin case Raise the needle to its highest position and open the hook cover. Open the hinged latch of the bobbin case and take it Remove the shuttle * Clean the shuttle race with a brush and soft dry cloth. To Assemble the Shuttle Race ® Pin @ Notch Hold the shuttle by the center pin and carefully fit it back into 54
© Levers
@ Shuttle race cover
© Shuttle
out of the machine. Open the shuttle race ring holders and
remove the shuttle race ring,
the shuttle race, forming a perfect circle with the shuttle
driver Attach the shuttle race ring making sure the bottom
pin fits into the notch. Lock the shuttle race ring by turning
the holders back into position. Insert the bobbin case.