Section v. buttonhole, Butionliole – Sears 38512102 User Manual

Page 56

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

SECTION V. BUTTONHOLE

Butionliole

(D Needle positions selector diai; CD

@ Stitch length dial;

0.6 to 1

(D Stitch width dial:

0 to 5

0 Needle thread tension:

1 to 4

Stitch width dial setting: (A) Set the dial at "2" for line-tack

I (B) I

(B) Set the dial at “S'* for bar-tack

—>1

(Bar-tack)

m Pull 6" (15 cm) of both threads to the side and under

the presserfoot.

0 Needle thread

Set the stitch length dial at “0” and the stitch width dial

at “5”.

m Lower the needle at the starting position, and lower the

presser foot. Sew 5 stKches for the bar-tack, then stop

the machine with the needle in the left position.

(D Stitch length dial: 0
0 Stftch width dial: S
0 Starling position

(Line-tack)

m Set the stitch length dial at "0.5'' and stitch width dial

at “2",

0 Stitch length dial: 0.5
® Stitch width dial:

in Sew the line-tack stitch for the desired length.