Inserting the bobbin, Ma j – Sears 38512102 User Manual

Page 28

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

• Inserting the bobbin

|T)

Place a

bobbin in the bobbin case maidng

sure

thread feeds clockwise coming from the bobbin.

Draw the thread through the slot of case.

I Continue to draw the thread under the tension spring and

through the opening.

Pull out about 4" (10 cm) of thread.

>
>

[3 Holding latch open, position the bobbir* «rase into the

shuttle and release latch.

[Q Case should lock into place when latch Is released.

—