Cabletron Systems STS16-20R - Manual (Page 149)

135
Switch Configuration SmartStack STS16-20D/STS16-20R Token Ring Switches Installation and User Guide
Telnet Configuration Screen
To open this screen from the main menu, select Configuration
→ → → →
Console
Configuration. Then select Telnet Configuration...
Return to Previous Menu
Returns to the Console Configuration menu.
Number of Telnet Sessions Allowed
Limits the number of Telnet sessions. Numbers allowed are from 1 to 5. Highlight
this selection, press
ENTER , and enter the number. Default is 5.
Disallow New Telnet Session
Choose Yes or No to allow or disallow a new Telnet session. Press ENTER at this
selection, use arrow keys to highlight Yes or No, and then press ENTER again.
Terminate All Active Telnet Sessions
If you highlight this selection and press ENTER , all Telnet sessions are terminated.
Telnet Sessions...
This item opens the Telnet Sessions screen that displays the status of Remote and
Local
Telnet sessions.
➽ Note: You cannot select Number of Telnet Sessions Allowed, Disallow New
Telnet Sessions , or Terminate All Active Telnet Sessions if you are accessing the
configuration program via Telnet.