Cabletron Systems SmartSwitch User Manual
Page 48
Chapter 1: SSR Product Overview
48
SmartSwitch Router User Reference Manual
Show SSR location.
system show location
Show the SSR login banner.
system show login-banner
Show SSR name.
system show name
Show the type of Power-On Self Test (POST)
that should be performed.
system show poweron-selftest-
mode
Show the configuration changes in the
scratchpad. These changes have not yet been
activated.
system show scratchpad
Show the startup configuration for the next
reboot.
system show startup-config
Show the status of the switching fabric
module.
system show switching-fabric
Show the IP address of the SYSLOG server
and the level of messages the SSR sends to the
server.
system show syslog
Lists the last five Telnet connections to the
SSR.
system show telnet-access
Show the default terminal settings (number of
rows, number of columns, and baud rate.
system show terminal
Show the time zone offset from UCT in
minutes.
system show timezone
Show SSR uptime.
system show uptime
Show the current Telnet connections to the
SSR.
system show users
Show the software version running on the
SSR.
system show version
Task
Command