Cabletron Systems SmartSwitch - Manual (Page 35)

SmartSwitch Router User Reference Manual 35
Chapter 1: SSR Product Overview
Enable Mode
Enable mode provides more facilities than User mode. You can display critical features
within Enable mode including router configuration, access control lists, and SNMP
statistics. To enter Enable mode, enter the enable command, then supply the password
when prompted.
To list the Enable commands, enter:
The Enable mode command prompt consists of the SSR name followed by the pound
sign(#):
To list the commands available in Enable mode, enter a question mark (?) as shown in the
following example:
multicast - Configure Multicast related parameters
ping - Ping utility
pvst - Show Per Vlan Spanning Tree Protocol (PVST)
parameters
sfs
- Show SecureFast Switching (SFS) parameters
statistics - Show or clear SSR statistics
stp - Show STP status
telnet - Telnet utility
traceroute - Traceroute utility
vlan - Show VLAN-related parameters
List the Enable commands. ?
ssr#
ssr# ?
acl
- Show L3 Access Control List
aging - Show L2 and L3 Aging information
arp - Show or modify ARP entries
bgp - Show Border Gateway Protocol (BGP) parameters
cli - Modify the command line interface behavior
configure - Enter Configuration Mode
copy - Copy configuration database
dhcp - Configure DHCP server
dvmrp - Show DVMRP related parameters
enable - Enable privileged user mode
exit - Exit current mode
file - File manipulation commands
filters - Show L2 security filters
frame-relay - Display Frame Relay statistics
help - Describe online help facility
http - Show http parameters
igmp - Show IGMP related parameters
interface - Show interface related parameters