Cabletron Systems SmartSwitch - Manual (Page 45)

SmartSwitch Router User Reference Manual 45
Chapter 1: SSR Product Overview
Configuring the SSR CLI
You can customize the CLI display format to a desired line length or row count. To
configure the CLI terminal display, enter the following command in Enable mode:
Configuring SNMP Services
The SSR accepts SNMP sets and gets from an SNMP manager. You can configure SSR
SNMP parameters including community strings and trap server target addresses.
To configure the SSR SNMP community string, enter the following command in
Configure mode:
To configure the SNMP trap server target address, enter the following command in
Configure mode:
Configuring DNS
The SSR allows you to configure up to three Domain Name Service (DNS) servers.
To configure the DNS, enter the following command in Configure mode:
Configure the CLI terminal display. cli set terminal rows columns
Configure the SNMP community string. snmp set community
privilege read|read-write
Configure the SNMP trap server
target address. snmp set target community
[status
enable|disable]
Configure DNS. system set dns server [, [, ]]
domain