Viconics VT8600 User Interface Guide - Manual (Page 10)

VT8600 Series User Interface Guide 10
Viconics Technologies Inc. 9245 Langelier Blvd. Saint-Leonard, Quebec, Canada, H1P 3K9 I +1 514 321 5660
028-0441-00 www.viconics.com November 2014
© 2
01
4 V
ic
on
ic
s T
ec
hn
ol
og
ie
s. A
ll r
ig
ht
s r
es
er
ve
d
.
Previous Next
Page Page
Com address
ZigBee Pan ID
1/2 ZigBee Network
ZigBee channel
0x0000 ZigBee short
0x0000 IEEE address
No NWK ZigBee status
254
0
10
Change Value
Only last 4 digits in HEX shown
ZigBee® Pro short address. The address is generated
once the device joins a ZigBee® network
ZIGBEE PRO NETWORK SETTINGS
The ZigBee Pro set-up screen shows when a ZigBee card is detected in the model. Select the desired parameter and use up or down
arrows to set the parameter to the desired value.
Status of controller detecting a ZigBee®
network. Shows Online when successfully connected
to network
Back to Setup Page
PARAMETER DETAILS
Configuration Parameters Default Value Significance and Adjustments
Com address
Terminal Equipment
Controller networking address
Default value:
254
Range value: 0 - 254
Communication Address
For wireless models, the use of COM address is not mandatory.
The extended IEEE ZigBee® node address is used to identify the
device on the network.
The COM address is an optional way to identify a device on the
network.