TYREDOG TD-2300A-X10 - Manual (Page 41)

TD-2300A Series V1.0 39
How to use your TPMS system Continued..
Wheel 1
Position
Flashing
To see the actual Temperature reading of the affected wheel, you will need
to press the Temperature button.
To stop the Monitor from Beeping, simply press the Mute Button. The
Monitor will still show the visual indication.
If the Temperature continues to raise above the High Temperature Thresh-
old setting, it will continue to Alarm and Warn you. (Warning Signs!!)
The only way to stop it from Alarming / Warning you is to bring your Tyre
Temperature back below the High Temperature Threshold setting.
This could mean that you might have to pull over (When safe to do so)
and check for any signs of damage or allow them to cool down.
High Tyre Temperature could be an early sign for a potential blowout.
3) High Temperature Warning / Indication
(Example when High Temperature Threshold is set to 70 deg C)
If the Tyre Temperature raises above your High Temperature Threshold
setting, the Monitor will start Beeping and the affected wheel position
will Flash between the actual Tyre pressure reading and T.H. (T.H.
meaning Temperature High). The Tyre symbol on the Monitor will also
change to indicate the Tyre Temperature is to High. So this means you
have both an Audible and Visual warning that there is something wrong
with your Tyre. Check out the Screen shots below.
128 / T.H
PSI A
128 128
B H
128
128
128
128
128
128
128
128
128
128
128
128
128 128
128
128
128
128
128
C
128
PSI A
128 128
B H
128
128
128
128
128
128
128
128
128
128
128
128
128 128
128
128
128
128
128
C
T.H