TYREDOG TD-2300A-X10 - Manual (Page 31)

TD-2300A Series V1.0 29
Type of Vehicle (Wheel Layouts) Continued..
Press the Backlight Button to continue. (If Trailer 1 Relay (B) is set to
NO. 1 NONE, pressing the Backlight button will take you back to Main
menu. (Now refer to step #3 below)
If you do select a Wheel Layout for Trailer 1 Relay (B), once you
Press the Backlight button, it will give you the option to configure Trailer
2 Relay (C).
Trailer 2 Relay (C) - Use the Mute and Temperature Buttons to
change the Wheel Layout for Trailer 2 Relay (C). Note: If you only have
a 2 Relay system, make sure Trailer 2 Relay (B) is set to NO. 1 NONE.
Once you have selected the Wheel Layout for Trailer 2 Relay (C), press
the Backlight Button and it will ask you want DISABLE or ENABLE the
Switchable Trailer Feature. Use the Mute Button to select between
DISBALE and ENABLE and press the backlight Button to Save and
return to the Main Menu. (For further information regarding Switchable
Trailer feature, please speak to your Authorised Tyredog Dealer)
ESC
Select ENABLE if you
have multiple Trailers
which are fitted with
Tyredog Relay Kits.
This allows the monitor to
auto detect and connect to
your other trailers when
you change over Trailers.
Select DISABLE if
you only have a
Tyredog unit fitted
to 1 Trailer.
3) Once you have returned to the Main Menu, you now must save these
new Wheel Layout settings to the Relay (Reset Relay) otherwise the
unit will default back to the old / original Wheel Layouts. To save the
new Layouts, please refer to Add new Relay Section on page #31.