TYREDOG TD-2300A-X10 - Manual (Page 36)

TD-2300A Series V1.0 34
Add new Sensor (LEARNABLE) Continued..
Push
Reset
Button
LED
2) Now Press the Reset Button on the Relay which requires the new
LEARNABLE sensor. Monitor will Beep and LED on Relay will illuminate
Red.
Add new Sensor
ESC
Once you have your new LEARNABLE replacement sensor, please follow
the steps below.
Note: The Relay must have power and the Monitor must be within range
of the Relay otherwise the procedure below will not work.
1) Press and hold the Mute Button for 3 seconds or until the Menu Screen
appears. Use the Mute Button to select Add new Sensor Menu then
press the Backlight Button to enter Add new Sensor Settings.
E) Add new
Sensor ESC
(Escape)
N/A N/A
Mute Temperature Backlight
Press the reset
button on the relay
ESC