TYREDOG TD-2300A-X10 - Manual (Page 27)

TD-2300A Series V1.0 25
Unit Settings
The Tyredog TD-2300A can be set up to display the following Pressure
and Temperature units.
Pressure - PSI / KPA / BAR / KgCm
Temperature - °C / °F
The unit is defaulted to display Pressure in PSI and Temperature in °C.
If you wish to change this, please follow these steps below.
U n i t Set t i n g
ESC
Pressure Unit
Temperature Unit
A) Unit Setting
>>
(Change) (Enter/Save) (Next Option)
Mute Temperature Backlight
2) Use the Mute Button to select between Pressure and Temperature then
press the Temperature Button to select your desired unit of
measurement. Once you have made a selection press the Backlight
Button to Save/Exit the Unit Setting Menu and return to the Main Menu
Screen. From here you can either change more settings or press the
Temperature (ESC) Button to exit the Main Menu and return to normal
operation.
1) Press and hold the Mute Button for 3 seconds or until the Menu Screen
appears like shown below then Press the Backlight Button to enter Unit
Settings.