TYREDOG TD-2300A-X10 - Manual (Page 17)

TD-2300A Series V1.0 15
Installation - Monitor / Receiver
The TD-2300A Monitor must be powered up
using the cigarette lighter adaptor supplied.
Simply plug the power cord into the monitor like
shown then connect the cigarette lighter plug to
a D.C. Outlet Socket in the vehicle.
12V / 24V DC
A
B
BATTERY POWER
The TD-2300A Monitor has a provision for 2 x AA Batteries which can be
inserted for Trouble Shooting and Testing Purposes Only. When the Moni-
tor is using Battery Power, the Monitor will automatically turn off after 60
seconds. Once the monitor turns off, you can press any button and it will
turn back on for a further 60 Seconds.
Battery Power can be used for setting the warning thresholds, program-
ming new relays, sensors etc..
Before reconnecting the monitor to hardwire (Cigarette Lighter Plug), we
recommend removing the AA Batteries from the Monitor.