TYREDOG TD-2300A-X10 - Manual (Page 40)

TD-2300A Series V1.0 38
How to use your TPMS system Continued..
PSI
A
128 128
141 128
B H
128
128
128
128
128
128
128
128
128
128
128
128
128 128
128
128
128
128
128
C
PSI
A
128 128
P .H128
B H
128
128
128
128
128
128
128
128
128
128
128
128
128 128
128
128
128
128
128
C
Wheel 1
Position
Flashing
To stop the Monitor from Beeping, simply press the Mute Button. The
Monitor will still show the visual indication.
If the Pressure continues to raise above the High Pressure Threshold set-
ting, it will continue to Alarm and Warn you. (Warning Signs!!)
The only way to stop it from Alarming / Warning you is to bring your Tyre
Pressure back below the High Pressure Threshold setting. This could
mean that you might have to deflate your Tyre or allow them to cool down.
Also check your Threshold settings and make sure your High Pressure
Threshold setting is set correctly as it’s normal for Tyre Pressure to
increase slightly while driving and in higher temperatures.
2) High Pressure Warning / Indication
(Example when High Pressure Threshold is set to 140 PSI)
If the Tyre Pressure raises above your High Pressure Threshold setting,
the Monitor will start Beeping and the affected wheel position will Flash
between the actual Tyre pressure reading and P.H. (P.H. meaning
Pressure High). The Tyre symbol on the Monitor will also change to
indicate the Tyre Pressure is to High. So this means you have both an
Audible and Visual warning that there is something wrong with your
Tyre. Check out the Screen shots below.
141 / P.H