beautypg.com

Operation function keys, Operations screens, Guidance operation - modes – TeeJet CenterLine 230BP User Manual

Page 18: 0 ft

background image

CenterLine 230BP

98-05112 R4

17

NOTE:

Once the Applied Area Screen is exited,

the area reset will become permanent. The

restore feature cannot be used after the

screen has been exited.

To exit the Applied Area screen, select the Change Page

key. The CenterLine 230BP will advance to the Navi-

gation screen.

NOTE:

If the system is not connected to a Smart-

Cable, Applied Area will not be accumu-

lated. The Applied Area screen will not be

displayed.

operation function Keys

There are several functions that can be performed during

operation. Most of these functions are initiated by the four

arrow keys, located on the keypad.

NOTE:

The Plus and Minus keys control

console brightness levels during Opera-

tions modes. However, if GPS is not being

received, the Plus and Minus keys

will control the contrast level.

operations screens

Several screens are displayed during vehicle operation.

They are consistent throughout the application and appear

as follows.

To change the view of any screen during Operations mode,

press the Change Page key.

Guidance operation - modes

Guidance capabilities include Straight A-B, Curved A-B,

Circle Pivot, and Headland Circuit.

NOTE:

LED spacing can be customized for user

preference. Refer to page 14 for informa-

tion on adjusting LED spacing.

lights illuminated on the right of the

lightbar require a steering adjustment

to the left

lights illuminated on the left of the

lightbar require a steering adjustment

to the right

Center

3.0 ft (.9 m)

4.5 ft (1.4 m)

6.0 ft (1.8 m)

7.5 ft (2.3 m)

1.5 ft (.45 m)

Guidance Mode

This key selects the desired guidance mode:

Straight A-B Guidance
Curved A-B Guidance

Circle Pivot Guidance

Headland Circuit

Setup Mode

This key exits OPERATION and

enters SETUP mode.

Mark A-B Line

This key allows the operator to establish a

new A-B line.

Return to Point

This key allows the operator to establish a

point in memory so CenterLine 230BP can

navigate the vehicle back to that point.

+2

Navigation

Screen

6.0

MPH

AUTO

Auto Boom Screen

6.0 Ft

Map Page

1200.0

33200.0

2

1

acres

Applied Area

Screen

Completed Circuit -

Calculated Area

1.5

6.0 MPH