TeeJet IC18 NH3 JOB COMPUTER - Manual (Page 41)

35
98-05230 R0 US
ISOBUS Job Computer : IC18 NH3
OVER
VIE
W
SE
TUP
APPENDIX
GE
TTING ST
AR
TED
OPER
ATION
HELP
The Help menu allows the operator to choose between Diagnostics and the display of information about serial
number, CAN BUS information, etc. These menus are typically accessed upon Customer Service personnel
request only.
MAIN SETUP MODE MENU STRUCTURE
| | | | | |
Counters Job Parameters Machine User Interface Communication Help
Diagnostic
About
1. From the Main Setup Screen , select HELP.
Figure 3-29: Help
2. Select from:
►Diagnostic – used to troubleshoot input/output of
the controller (sensor or actuator).
►About – provides information on the console such
as software version, build number, etc.
NOTE: Settings are NOT automatically saved when
selected. The ACCEPT KEY must be selected
to save the setting. Select the ESCAPE KEY
to escape without saving settings and return to the
previous menu.