TeeJet IC18 NH3 JOB COMPUTER - Manual (Page 36)

30
www.teejet.com
ISOBUS Job Computer : IC18 NH3
OVER
VIE
W
SE
TUP
APPENDIX
GE
TTING ST
AR
TED
OPER
ATION
Alarm Configurations
Figure 3-23: Alarm Configurations
Alarm Configurations establishes alarms for CAN Speed
Source Timeout, Active Trip Count Information mode and
Tank Content Minimum.
CAN Speed Source Timeout
CAN Speed Source Timeout establishes how long the
system can operate after the CAN speed source input is
lost and the alarm is triggered.
• To select the CAN Speed Source Timeout time, use
the number pad or slide bar.
Active Trip Count Information
Active Trip Count Information sets the associated alarm to
on or off.
• To select the Active Trip Count Information mode, select an option from the drop down menu or use the UP/
DOWN ARROWS to highlight the option.
Tank Content Minimum
Tank Content Minimum establishes the minimum volume level at which an alarm will sound. Without a Tank
Sensor, the minimum is determined by calculating the difference between the established actual tank content
volume and the calculated applied content volume. With a Tank Sensor, the minimum is directly related to the
sensor reading.
• To select the volume, use the number pad or slide bar.