TeeJet IC18 SPRAYER JOB COMPUTER - Manual (Page 32)

27
98-05204 R1 UK
OVER
VIE
W
SE
TUP
APPENDIX
GE
TTING ST
AR
TED
OPER
ATION
ISOBUS Job Computer : IC18 Sprayer
Keys Descriptions
Icon Description
Home Key Press to return to the Home Screen
Start/Stop Key Press to start or stop application
Information Key Press to toggle between display modes
Boost/Step Percentage
Increase/Decrease Keys
Press to establish the required boost percentage step, i.e. the step size, at which the
application rate is to increase/decrease with the boost function
Manual Mode Regulation
Valve Open Keys
Press to open the regulation valve
Press to close the regulation valve
Toggle Preset Target Rates
Key
Press to toggle between established target application rates
Auto/Manual Key Press to toggle between automatic and manual application modes.
Automatic regulation mode will automatically adjust the application rate based on the current
speed in reference to the target rate.
Manual regulation mode will retain an established regulation valve setting regardless of speed.
Tank Filling Shortcut Key Press for one-press access to the Tank Filling setup screen
Master Stop Key Press to stop all application, close all regulation valves and change to manual regulation mode
Next Page Key Press to toggle between soft key options
Boom Sections On/Off
Keys
Press to turn on sections to left , turn off sections from left , turn on sections to right or
turn off sections from right
Section and Icon Descriptions
Section or Icon Description
Job Information This information bar displays the active count number,
applied volume and applied area
C n t 1 0 l 0 . 0 0 h a
Count Number Displays the current active trip or job number
Applied Volume Displays volume applied for the selected count number
Applied Area Displays applied area for the selected count number
Speed/Application Information Displays vehicle speed or volume applied per minute or projected area per hour to be covered or
projected total area remaining to be covered depending upon which view is active.
The Information Key toggles between display modes.
Remaining Tank Contents Displays the remaining tank content
NOTE: If no tank sensor is fitted or the contents are not entered in the Tank Filling
Menu prior to spraying, Tank Contents may not display the correct amount.
Application Rate Displays the actual application rate per hectare/acre
NOTE: When the Master is “On” the actual application rate per hectare/acre will be displayed.
When the Master is “Off” the target rate is displayed and the TARGET RATE ICON
appears
Target Rate Percentage
Increase/Decrease
Displays boost percentage step, i.e. the step size, at which the application rate is to
increase/decrease with the boost function
Alarm Displayed if an alarm condition is active