TeeJet IC18 SPRAYER JOB COMPUTER - Manual (Page 30)

25
98-05204 R1 UK
OVER
VIE
W
SE
TUP
APPENDIX
GE
TTING ST
AR
TED
OPER
ATION
ISOBUS Job Computer : IC18 Sprayer
CHAPTER 4 – OPERATION MODE
The Operation Screen accesses the working aspects of the IC18 including boom section control, rate control and trip/count/
application information.
NOTE: Settings are automatically saved when selected.
NOTE: The menu structure on your display might vary from the one displayed in this User Manual depending on the virtual
terminal being used.
AUTOMATIC OR MANUAL REGULATION MODE
Automatic regulation mode will automatically adjust the application rate based on the current speed in reference to the target
rate. The target rate can be adjusted using the Boost/Step % Increase/Decrease Keys on the Operation Screen.
Preset Application Rates define up to five (5) target rates for product being applied per hectare/acre. These can be toggled
using the Toggle Preset Target Rate Key on the Operation Screen or Home Screen.
Manual regulation mode will retain an established regulation valve setting regardless of speed. The regulation valve setting
can be adjusted using the Regulation Valve Open/Close Keys on the Operation Screen.
If a switchbox is being used to control the boom sections, automatic or manual regulation mode can be set on the Operation Screen.
When using the IC18, not a switchbox, for boom section control, automatic or manual regulation mode needs to be
established on the Home Screen before entering Operation Mode.
1. On the Home Screen or Operation Screen , establish Automatic Operation Mode or Manual Operation Mode by
pressing the AUTO/MANUAL KEY so that the green dot is on AUTO (automatic) or the hand (manual) accordingly.
Figure 4-1: Auto/Manual Key on Home Screen Auto/Manual Key on Operation Screen
C n t 5
5 . 2 2 8 3
4 0 7 0 l
0
b a r
1 . 1 4 h a
+ 5 %
1 3 11 l / h a
1
k m / h