SUUNTO VYTEC - Manual (Page 59)

57
5. CARE AND MAINTENANCE
This SUUNTO dive computer is a sophisticated precision instrument.
Though designed to withstand the rigors of scuba diving you must treat
it with proper care and caution as any other precision instrument.
5.1. IMPORTANT INFORMATION
WATER CONTACTS AND PUSH BUTTONS
Contamination or dirt on the water contacts/connector or push buttons
may prevent the automatic activation of the Dive Mode and cause prob-
lems during the data transfer. Therefore, it is important that the water
contacts and push buttons are kept clean. If the water contacts of the
instrument are active (AC-text remains on display) or the Dive Mode
activates on its own, the reason for this is probably contamination or
invisible marine growth that may create an unwanted electric current
between the contacts. It is important that the dive computer is carefully
washed in fresh water after the day’s diving is completed. The contacts
can be cleaned with fresh water and, if necessary, a mild detergent and
a soft brush. Sometimes it might be necessary to remove the instru-
ment from the protective boot for cleaning.
5.2. CARE OF YOUR DIVE COMPUTER
• NEVER try to open the case of the dive computer.
• Service your dive computer every two years or after 200 dives
(whichever comes first) by an authorized dealer or distributor.
This service will include a general operational check,
replacement of the battery, and water resistance check. The
service requires special tools and training. Therefore, it is
advisable to contact an authorized SUUNTO dealer or
distributor for biennial service. Do not attempt to do any service
that you are not sure about how to do.
• Should moisture appear inside the case or battery compartment
have the instrument checked immediately by your SUUNTO
dealer or distributor.
• Should you detect scratches, cracks or other such flaws on the
display that may impair its durability, have it replaced
immediately by your SUUNTO dealer or distributor.
• Check the spring bars holding the strap and the buckle for flaws.
If the flexibility of the spring bars has reduced, have them
replaced immediately by your SUUNTO dealer or distributor.
• Wash and rinse the unit in fresh water after every use.