Simulation mode [2 simul, Dive simulator [1 simdive – SUUNTO VYTEC User Manual

Page 52

NOTE! While in the Data Transfer mode, the

connector/water contacts are used only for

the data transfer. The Dive Mode IS NOT au-

tomatically activated if the contacts are sub-

merged.
After you have finished the data transfer,

press the SMART (Quit) to exit Data Transfer

mode. If a button is not pressed or no data is

transferred within 5 minutes, the instrument

beeps and returns to the timekeeping display

automatically.

4.2. SIMULATION MODE

[2 SIMUL]

The Simulation mode can be used to acquaint

yourself with the features and displays of the

instrument before diving, to plan dives in ad-

vance, for demonstration or education pur-

poses, or just for pleasure.
The dive computer has two simulation modes

(Fig. 4.16.):

The DIVE SIMULATOR (Fig. 4.17.)

The DIVE PLANNING SIMULATOR

(Fig. 4.19.).

In Simulation Mode, time moves four times

faster than real time (when diving), i.e., 15s =

1min.

4.2.1. Dive Simulator

[1 SIMDIVE]

The Dive Simulator mode is an excellent tool

for becoming familiar with the dive computer

and planning your dives. Suunto recommends

using the dive simulator to run through differ-

ent dive scenarios. The Dive Simulator will

allow you to perform dive profiles of your

choice and see what the display would look

like during an actual dive. This includes basic

dive information, as well as audible and visu-

Fig. 4.19. Dive Planning

Simulator mode.

[2 SIMPLAN].

SELECT

Fig. 4.17. Dive Simulator

mode. [1 SIMDIVE].

Fig. 4.18. Selected Dive

Simulator mode.

Descend by pressing the

arrow down (TIME)

button and ascend by

pressing the arrow up

(PLAN) button.

SELECT

TIME

DIVE

QUIT

bar