SUUNTO VYTEC - Manual (Page 54)

52
4.3.1. Dive Parameter Settings
[1 SET DIVE]
To enter the Dive Parameter Setting Mode se-
lect MODE- 3 SET- 1 SET DIVE. The Dive Pa-
rameter Setting mode has two to four options
depending on the dive computer mode. In
Gauge mode there are two options, in Air
mode three options and in Nitrox mode four
options.
4.3.1.1. Altitude Adjustment,
Personal Adjustment and RGBM
Settings [1 AdJ MODE]
The current Altitude and Personal Adjustment
modes are shown when diving and at the sur-
face. If the mode does not match the altitude or
personal conditions (see section 3.8. “High Alti-
tude Dives and Personal Adjustment”), it is im-
perative that you enter the correct selection be-
fore diving. Use the Altitude Adjustment to se-
lect the correct altitude mode. Use the Personal
Adjustment to add an extra level of conser-
vatism.
For certain divers and diving conditions you
may want to set attenuated RGBM mode
When this selection is made it is indicated
with a continuously displayed Diver Attention
Symbol. The options are full RGBM effects
(RGB100), and attenuated RGBM (RGB50).
To enter the Altitude Adjustment, Personal Ad-
justment and RGBM effect Setting mode, select
MODE- 3 SET- 1 SET DIVE- 1 AdJ MODE. Now
you are able to select from the three altitude
modes (Fig. 4.23.) and the three personal
modes (Fig. 4.24.) and the two RGBM effect,
full normal or limited attenuated, modes
(Fig. 4.25.).
OK
Fig. 4.25 Setting RGBM
adjustment. Press scroll
buttons to change setting.
Fig. 4.23. Setting
Altitude adjustment.
Press scroll buttons to
change altitude mode.
Fig. 4.24. Setting
Personal adjustment.
Press scroll buttons to
change personal mode.
OK
OK