SUUNTO VYTEC User Manual
Page 50
48
DIVE PROFILE MEMORY [PROF]
The scrolling of the profile will start automati-
cally when the Logbook page IV (PROF) is
entered.
With the default setting, the dive profile is re-
corded and displayed in 20-second incre-
ments with each display being shown for
about three seconds. The depths shown are
the maximum values of each interval.
Pressing any button stops the scrolling of the
profile.
NOTE! Several repetitive dives are consid-
ered to belong to the same repetitive dive se-
ries if the no-flying time has not ended. See
Dive Numbering in section 3.6.2. for further
information.
4.1.2. Dive History Memory
[2 HISTORY]
The Dive History is a summary of all the dives
recorded by the dive computer. To enter the
Dive History Memory Mode select MODE- 1
MEMORY- 2 HISTORY (Fig. 4.13.).
The following information will be shown on the
display (Fig. 4.14.):
the maximum depth ever reached
the total accumulated dive time in
hours
the total number of dives.
The Dive History Memory can hold a maxi-
mum of 999 dives and 999 diving hours.
When these maximum values are reached,
the counters will start again from zero.
NOTE! The maximum depth can be reset to
0.0 m [0 ft] using the optional PC-Interface
unit and Suunto Dive Manager software.
Fig. 4.15. Data Transfer
mode. [3 TR-PC].
Fig. 4.16. Dive Simulation
options. [2 SIMUL].
SELECT
OPTIONS
QUIT
Fig. 4.14. Dive History
information. Total
number of dives, dive
hours and maximum
depth.
MAX
TIME
DIVE
DIVE
QUIT