SUUNTO VYTEC - Manual (Page 4)

2
PrEN 13319
PrEN 13319 ”Diving accessories – Depth gauges and combined depth
and time measuring devices – Functional and safety requirements, test
methods” is a European diving depth gauge standard draft. The VYTEC
is designed to comply with this draft standard.
ISO 9001
SUUNTO Oy’s Quality Assurance System is certified by Det Norske
Veritas to be according to the ISO 9001 in all SUUNTO Oy’s operations
(Quality Certificate No. 96-HEL-AQ-220).
SUUNTO Oy does not assume any responsibility for losses or claims
by third parties, which may arise through the use of this device.
Due to continuous product development, the VYTEC is subject to
change without notice.
WARNING!
READ THIS MANUAL! Carefully read this instruction manual in its
entirety paying close attention to all warnings listed below, including
section 1.1. ”Safety Precautions”. Make sure that you fully under-
stand the use, displays and limitations of the dive computer because
any confusion resulting from neglecting to follow this instruction
manual or from improper use of this device may cause a diver to
commit errors that may lead to serious injury or death.
WARNING!
NOT FOR PROFESSIONAL USE! Suunto dive computers are in-
tended for recreational use only. The demands of commercial or pro-
fessional diving may expose the diver to depths and exposures that
tend to increase the risk of decompression illness (DCI). Therefore,
Suunto strongly recommends that the device be not used for com-
mercial or professional diving activity.
WARNING!
ONLY DIVERS TRAINED IN THE PROPER USE OF SCUBA
DIVING EQUIPMENT SHOULD USE A DIVE COMPUTER! No dive
computer can replace the need for proper dive training. Insufficient
or improper training may cause diver to commit errors that may lead
to serious injury or death.