SUUNTO VYTEC - Manual (Page 45)

43
4. MENU BASED MODES
To make yourself familiar with the menu
based functions, please use your Quick Re-
ference Guide supplied with the Vytec to-
gether with the information in this chapter.
The main menu based functions are grouped
under 1) memory, 2) dive simulation and 3)
setting modes.
THE USE OF THE MENU BASED
FUNCTIONS
1. Activate the menu based modes by
pressing once the SMART (MODE) but-
ton in the Dive Mode (Fig. 4.1.).
2. Scroll the mode options by pressing the
arrow up/down buttons. When scrolling
the options, the label and an equivalent
number are shown on the display (Fig.
4.2. – 4.4.).
3. Press the SMART (Select) button once to
select the desired option.
4. Scroll the submode options by pressing
the arrow up/down buttons. When scroll-
ing the options, the label and an equiva-
lent number are shown on the display.
5. Select the desired option by pressing
once the SMART (Select) button. Repeat
the procedure, if there are more sub-
modes.
6. Depending on the mode, you are now
able to have a look at the memories, sim-
ulate a dive, or make desired settings
(use the the arrow up/down buttons). The
SMART button is used to Quit or to con-
firm the settings (OK).
If you do not press any of the buttons for 5
minutes while in a Menu based mode, the in-
strument beeps and returns to the timekeep-
ing display. In the Simulation Mode, however,
the equivalent time is 60 minutes.
OPTIONS
QUIT
SELECT SELECT SELECT
SELECT
SELECT
Fig. 4.1. Main menu based
Mode options. [3 MODE].
Fig. 4.2. Memory option.
[1 MEMORY].
Fig. 4.3. Simulation
option. [2 SIMUL].
Fig. 4.4. Set option.
[3 SET].