Muse Research Receptor manual v1.2 - Manual (Page 63)

5: View Buttons in Depth 63 Receptor Manual
Receptor defaults to 44.1 kHz, which is the standard “CD quality” sample rate. Choosing higher rates may result
in slightly better fidelity, but will make greater demands on Receptor’s CPU, resulting in fewer simultaneous
plugins and reduced polyphony. Also, be aware that not all plugins are designed to operate properly at higher
rates.
S U M a s t e r S a m p l e R a t e < >
III III 4 4 . 1 k H z
Rotate the bottom display knob to select the desired sample rate. The selection flashes indicating you must press
the bottom display knob to apply the change. The Master Sample Rate is a global setting and, as such, is not
stored with any patch
SETUP: Sample Buffer Size
Rotate the top display knob to select the Sample Buffer Size parameter. Selecting a smaller buffer size will
result in very low latencies, meaning Receptor will be extremely responsive to your playing. The trade-off is
that you will be able to instantiate fewer plugins. If you want to instantiate more plugins, or some particularly
CPU-intensive plugins, you will need to set the buffer size to a higher value.
S U S a m p l e B u f f e r S i z e < >
III III 1 2 8 S a m p l e s
Rotate the bottom display knob to choose the desired buffer size. The selection flashes, indicating you must
press the bottom display knob to apply the change.
The Sample Buffer Size is a global setting and, as such, is not stored with any patch.
SETUP: View Bank MSB/LSB
Rotate the top display knob to select the
View Bank MSB/LSB
parameter. This gives you a convenient way to
view the MSB/LSB MIDI Bank Select message values for any bank in Receptor.
S U V i e w B a n k M S B / L S B < >
III III M u l t i
Rotate the bottom display knob to select the patch type whose MIDI Bank Select messages you wish to change.
“Multi” is the first choice, followed by “Single.” Then, as you continue to rotate the bottom display knob, you’ll
see the name of each Receptor plugin in alphabetical order.
S U V i e w B a n k M S B / L S B < >
III III L o u n g e L i z a r d
The selection name is flashing, indicating you must press the bottom display knob to apply it. Select the type
of bank whose MSB/LSB numbering you wish to see, then press the bottom display knob. Rotate the bottom
display knob to select the bank whose MIDI Bank Select numbers you wish to view.
S U V i e w B a n k M S B / L S B < >
III III B a n k : W u r l i s