Preparation, Connect your antenna, Connect to power – Philips 28PW778A User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Preparation
Connect your antenna
We recommend that you use a good outdoor antenna for best reception of broadcast VHF/UHF
channels. You may need to use one of the adaptors/mixers (not supplied). Consult your local dealer
if you have any queries or need any assistance on connection.
Back of television
Antena UHF Antena VHF
1
Option 1
Option 2
Option 3
a
UHF/VHF
coaxial
(75 ohms)
CK
VHF coaxial
(75 ohms)
i»n
s
aiy
ATTENUATOR
• ON
•OFF
^ CABLE
Atenuador On/Off
The attenuator switch should
always be at the "OFF"
position.
Switch on the attenuator only
if the television programmes
have interference from other
channel.
UHFfita
(300 ohms)
Connect to power
Referto the specification pageforthe correct operating voltage. Consultyour local dealer if your mains
supply is different.
Connect your television to the mains supply socket and switch on.