FXpansion DCAM Synth Squad Operation Manual - Manual (Page 33)

Using variable-depth osc sync in Cypher
. Fully turn up Osc2’s Gain control. 1. Change the osc section’s unit/
snapping options to Equal.
. Play a key – you’ll hear a simple saw-wave tone.
Now increase the Osc2 Scale control to +15 and play a key. You
should hear a 2-note minor chord.
4. Increase the Osc2 Sync to 1 control.
As the setting goes over about 30%, the chord is no longer heard
– it is now a complex waveform.
5. Now try a ‘sync sweep’: move the Osc2 Scale control up and
down.